LucBoivin
11-07-2006, 11:07 PM
Here's something I started tonite. Working on a 100% white cotton medium size shirt. I've it over a 1/4'' masonite panel cut to proper size to get the fabric stretched enough. Did my surface prep with some GAC900 from Golden then heat set with hot iron.
Working with createx paints, I started with a base color made of some light brown, fluorescent magenta, golden yellow and a bit of flesh color... All mixed with some extender and some water. I'm working with my Iwata HP-SB at roughly 35PSI
I wanted to work on another monochrom canvas painting but wanted to play around with some color since I'll want to do a color portrait painting on canvas soon and I thought this would be a good exercise. I find working on white T allot harder than black since you are not allowed to mess up!! With black you can always come back and fix edges and stuff...but not with white!!
Luc
Working with createx paints, I started with a base color made of some light brown, fluorescent magenta, golden yellow and a bit of flesh color... All mixed with some extender and some water. I'm working with my Iwata HP-SB at roughly 35PSI
I wanted to work on another monochrom canvas painting but wanted to play around with some color since I'll want to do a color portrait painting on canvas soon and I thought this would be a good exercise. I find working on white T allot harder than black since you are not allowed to mess up!! With black you can always come back and fix edges and stuff...but not with white!!
Luc