Paint Stands

[kruble]

Can anyone post some pics and info on the type of stands they use? Looking for motorcycle parts stands sport and crusier.
Thanks

[Whit]

Mines long gone but it was made out of an
old pedestal fan base,,, the big ones !!!
Had about a 2ft heavy base w/pedestal,,,
had arms welded to a sleeve that fit over
the upright to swivel !!!
One arm had the curve,, for fenders,,, one
just a bar (with peg under) and a couple
of hooks for tanks !!! Solid tank fit the bar
and the peg under kept tank from rotating
over an fallin off, hooks were for 2pc tanks !!!
I know it does'nt help without seeing,, but
may give you food for thought !!!
-
here's a ruff drawing to give an idea !!!
Hope this helps !!!

[Ultra Al]

I made mine from paint roller stands I got at Harbor Freight on sale for about 7 bucks each. i also have 2 for fenders and 2 for glass bags. I have made some mods since these pictures were taken. You can buy flat stock or that steel stock with holes already drilled and cover them with foam pipe insulation. I used the square stock shown to make the tank stands. They are not perfect but they work ok. One thing I did was take off the flimsy tubing you see at the bottom, first time I stepped on it it bent so I replaced it with 1/8 thick by 1" wide flat stock. Id like to come up with a locking device that would allow me to rotate the tanks, any suggestions? AL

[colourshift]

My friend gave me two, they're made from angle iron, and old wheel rims, so they're really bottom heavy.

[bakerboyz]

I have alot of various stands made for the sop but one that really works well for me is an engine stand